型号：20G、40G、60G、120G

品牌：Sqoe斯卡尔

编号：***

20G Operation Manual

CONTROL FUNCTIONS：

INPUT------------------------Connection forinstrument

GAIN-------------------------Sets the amount of gain or distortion in the driveChannel higher setting provide additional distortion

BOOST SWITCH--------------Tuns the drive on and off. The clean channel is selected When this switch is out

VOLUME--------------------- Setting from zero to full power

TREBLE----------------------- Provides high frequency equalization as required

MIDDLE-----------------------Provides active midrange equalization with boost & cut

BASS--------------------------Provides desired amount of bass response

PHONES----------------------Used to connect stereo headphone Automatically turns off the amplifier speaker

ON/OFF SWITCH-------------Turns amplifier ON & OFF

40G Operation Manual

CONTROL FUNCTIONS：

INPUT------------------------Connection forinstrument

NORMAL VOLUME----------Setting from zero to full power

GAIN-------------------------Sets the amount of gain or distortion in the driveChannel higher setting provide additional distortion

DRIVE SWITCH---------------Select between drive and clean sounds

DRIVE VOLUME--------------Provides drive volume of the distortion sounds

TREBLE----------------------- Provides high frequency equalization as required

MIDDLE-----------------------Provides active midrange equalization with boost & cut

BASS--------------------------Provides desired amount of bass response

REVERB-----------------------Provides desired amount ofamplifier reverb

AUX---------------------------Connection forTAPE or CD

PHONES----------------------Used to connect stereo headphone Automatically turns off the amplifier speaker

60G Operation Manual

CONTROL FUNCTIONS：

INPUT------------------------Plug your quitarin here

NORMAL VOLUME----------Adjusts the loudness of the normal channel

GAIN-------------------------Adjusts the amount of gain and overdrive in the drive channel,in conjunction with the drive volume control

DRIVE SELECT---------------Activates the drive channel

DRIVE VOLUME-------------Adjusts the loudness ofthe drive channelin conjunction with the gain control

DRIVE CHANNEL INDICATOR -----llluminates when the drive channelis active

TREBLE----------------------Adjusts the high - frequency level

MIDDLE---------------------Adjusts the middle - frequency level

BASS------------------------Adjusts the low -frequency level

REVERB---------------------Adjusts the reverb effect level for both channels

AUX IN---------------------RCAnput jacks for use with a portable CD or tape player, drum machine,etc. These input jacks are not affected by the amplifier's volume or tone controls. Adjust the signal at the source

FOOTSWITCH--------------Connect the foot switch (optional) at this jack for remote channel switching capability. The gain select switch must be OUT for the foot switch to operate properly

HEAD PHONES------------Output jack for standard stereo or mono headphones. Using this jack automatically disconnects the speaker, This jack can also be used as an unbalanced line output by using either a stereo or mono 1/4" phone plug connection

POWER INDICATOR--------llluminates when the unit is ON

POWER SWITCH------------This switch turns the unit ON and OFF

120G Operation Manual

CONTROL FUNCTIONS：

HIGHINPUT------Is normal sensitivity for most guitars

LOW INPUT------Is lower sensitivity for guitars with high output (active) pickups

VOLUME---------Adjusts the loudness ofthe Normal channel

TREBLE/MIDDLE/BASS---Adjusts the high,middle, and low frequency tones of the normal channel

DRIVE CHANNEL INDICATORS-----Yellow LED ONdrive channelis active Red LED ON more drive channelis active

DRIVE----Adjusts the distortion level of the drive channel. Use together with VOLUME to adjust the overall loudness of the drive channel

CHANNEL SELECT-------Button OUT selects the Normal channel Button IN selects the Drive channel

VOLUME-----------------Adjusts loudness of the Drive channel together with DRIVE

MORE DRIVE-------------Boosts the intensity and range ofthe DRIVE control.

                                        Button OUT selects the Normal channel

                                        Button IN selects the Drive channel

TREBLE/MIDDLE/BASS---Adjusts the high, middle, and low frequency tones of the drive channel.

MID-CONTOUR----------Activates a“scooped" midrange EQ useful for modern distortion sounds in the drive channel

REVERB-------------------Adjusts the reverb level for both channels

FOOT SWITCH------------Connect the 2-buttonLisheng foot switch to this jack to enable remote switching of CH SELECT, and                                               DRIVE/MORE DRIVE. When pluggedin, the foot switch overrides the corresponding panel buttons

PRE OUTPOWIN----------(1) Effects Loop - Connect PRE OUT to an effects device input, then connect the effects device output                                                  to POWIN

                                         (2) Multiple Amps  Connect the primary unit's PRE OUT to the auxiliary unit's POW iN. the primary unit                                                is used to control all auxiliary units

                                         (3) Recording or Rein for cement -Connect PRE OUT to sound equipment's input.

Both jacks use a TS(Tip-Sleeve)standard type plug for connections,PRE OUTincludes onboard tone shaping.

POWERINDICATOR--------Lights up when the amplifieris on

POWER--------------------Switches the amplifier on and off

POWER CORD SOCKET---Connect the included power supply cord inPOWER CORD SOCKETaccordance with the voltage and                                                 frequencyratings listed on the rear panel ofyour amplifier